REICH MoveControl Compact Instructions D'assemblage Et Mode D'emploi page 31

6. Startup / Operation
B5 Direction keys:
The integrated "Soft-Start" gives an acoustic
signal when starting to move which is meant as a
warning signal of a caravan or trailer starting to
move.
The movement buttons have to be pressed
respectively one by one. The arrows by the
buttons show the respective direction of motion.
Forward
Curve drive:
Left wheel
forward
Left wheel
backward
Rotation
(pushing 2 buttons simultaneously) :
+
+
Anti clockwise rotation
If the movements do not correspond to the
symbols on the remote control, the cable
connections of the right and the left drive units
need to be checked and - if necessary -
exchanged (see wiring diagram
It is important that in such a case you turn the
isolating switch off and disconnect the Basic
Station from the electricity supply.
Make sure that you never exchange
the Positive (+) and Negative (-) of
the electricity supply.
Backward
Right wheel
forward
Right wheel
backward
Clockwise rotation
).
B6 Disengaging the friction rollers:
Before you release the friction
rollers, please ensure that your
brake is engaged to prevent your
caravan rolling away!
When the shunting process is finished, the driving
rollers are removed
simultaneously pressing the two arrow keys:
+
In final position, the MotorDrive will be switched-
off automatically.
B7 Turn OFF MoveControl
Turn off the MoveControl by pushing the
I/O button once at the remote control. The
red LED will turn OFF.
The drive units must not be left connected to the
tyres for long periods of time, as this can result in
damage to the tyres. Movement with a motor
vehicle while the drive units are connected is not
allowed, as the caravan or trailer as well as the
motor vehicle can be damaged.
B8 Turn OFF System
Turn OFF the isolation switch.
Pull on the handbrake and/or secure your caravan
or trailer against rolling away with the help of
chocks.
from the tyres by
GB9