The Ae-L/Af-L Button; Using The Battery Pack; Attaching The Battery Pack; Removing The Battery Pack - Nikon MB-D80 Manuel D'utilisation

The AE-L/AF-L Button

The AE-L/AF-L Button
The MB-D80 is equipped with an alternate AE
En
L/AFL button for use when taking photographs
in "tall" (portrait) orientation.
D80: The MB-D80 AEL/AFL button performs the
same functions as the AEL/AFL button on the
camera and is aff ected by changes to Custom
Setting 18 (AE-L/AF-L). See the camera Guide
to Digital Photography for details.
D90: The function performed by the MB-D80
AEL/AFL button can be chosen using Custom
Setting a6 (AE-L/AF-L for MB-D80). See the
camera manual for details.
4

Using the Battery Pack

Attaching the Battery Pack

Attaching the Battery Pack
Before attaching the battery pack, be sure that the camera is off and that the MB-D80 control lock
(Figure A- ) is in the L position (the illustrations show the D80).
1 Remove the contact cap (Figure A- ) from the battery pack. Be sure to replace the cap when
the MB-D80 is not in use. The cap can be threaded onto the camera strap when removed from
the battery pack.
2 Open the camera battery-chamber cover and remove it from the base of the camera handgrip
as shown in Figure B. Remove the battery, if present, and place the camera battery-chamber
cover in the battery-chamber cover holder (Figure C).
A PB-6D and PK-13 auto-extension ring are required when using PB-6 bellows with the
MB-D80.
3 Insert the MB-D80 as shown in Figure D.
4 Firmly tighten the attachment wheel by rotating it in the direction shown by the LOCK arrow
(Figure E).

Removing the Battery Pack

Removing the Battery Pack
To remove the MB-D80, turn the camera off and set the control lock on the MB-D80 to L and then
follow the above steps in the reverse order.
Be sure to place the camera battery-chamber cover in the battery-chamber cover holder to prevent
loss.