English - Philips GC9600 Mode D'emploi

ENGLISH

8
2x
Ironing
1 Place the steam generator on a stable and even surface.
2 Make sure that there is enough water in the water tank
(see section 'Filling the water tank').
3 Put the mains plug in an earthed wall socket and press the on/off
button to switch on the steam generator. The blue power-on light
on the appliance and the 'iron ready' light start to flash to indicate
that the appliance is heating up (this takes approx. 2 minutes).
When the appliance is ready for use, the 'iron ready light' and
,
the power-on light stop flashing and light up continuously.
Additionally you hear a short beep.
4 Press the carry lock release button to unlock the iron from the iron
platform.
5 Press and hold the steam trigger to start ironing.
Never direct steam at people.
Steam boost function
The steam boost function is designed to help tackle difficult creases.
- Double press the steam trigger for a continuous shot of steam. It is not
necessary to press and hold the steam trigger continuously when the
steam boost function is activated. To stop the steam boost function,
press the steam trigger once.