Operating Elements; Start-Up - Speaka 34 25 11 Mode D'emploi

• Also follow the safety information and operating instructions of the other devices that are connected to this one and the
additional safety information in the individual sections of these instructions.
• Do not leave used packing material unattended, as they may be dangerous for children playing with them.
• Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
• If any questions arise that are not answered in this operating instruction, please contact our Technical Advisory Service or
other experts.

5. Operating elements

1
2
6

6. Start-up

a) Installation
During installation, make sure that connection cables are not crimped or damaged by sharp edges. Install the
A/V selector switch on a flat, stable, horizontal surface. Choose an installation location that the connection
cables of all source devices to be connected can reach. A wall outlet for the power supply also has to be
reachable nearby. The location should also be chosen so that intense sunlight or heat from other devices is
avoided as much as possible. Make sure that the ventilation openings on the device itself are unobstructed
so that cooling inside is ensured.
4
3
7 8
9
`
1
2
3
4
5
5
11
6
7
8
9
10
10
11
Front
Input channel selector
ON/OFF switch
Infrared receiver
Channel display "CH1 - CH5"
Input 5 (Cinch)
Back
Input 1 Cinch, SCART, S-VHS, OPTICAL
Input 2 Cinch, SCART, S-VHS, OPTICAL
Input 3 SCART
Input 4 Cinch, SCART
Output Cinch, SCART, S-VHS, OPTICAL
Power supply
13