Operating; Setting Up The Radio-Controlled Power Socket; Control The Radio-Controlled Power Socket - Goobay 94501 Mode D'emploi

6

Operating

6.1

Setting up the radio-controlled power socket

Fig. 5: Setting up the radio-controlled power socket
1. Set the channel switch of the radio-controlled power socket to a channel
from 1 to 4.
2. Repeat step 1 for further radio-controlled power sockets, if available.
Up to 4 radio-controlled power sockets are controllable separately via diffe-
rent radio frequencies.
If the same channel is set to two or more radio-controlled power sockets,
any number of further radio-controlled power sockets can be controlled per
channel.
For this, a good positioning and possibly multiple operations of the respective
channel command (ON / OFF) is necessary.
6.2

Control the radio-controlled power socket

Fig. 6: Control the radio-controlled power socket
• Turn the radio-controlled power socket ON or OFF via the channel swit-
ches 1-4 of the remote control.
The Operation LED of the radio-controlled power socket lights up when it is
turned on.
Voltage is applied.
16