Intended Use; Remote Control; Activating The Remote Control; Replacing The Battery - Goobay 94501 Mode D'emploi

User manual
3

Intended Use

We do not permit using the device in other ways like described in chapter
"Description and Function" and „Safety Instructions". Not attending to these
regulations and safety instructions might cause fatal accidents, injuries, and
damages to persons and property.
Only for use in dry ambience.
IP20
This product is protected against medium sized foreign objects, but
not against water ingress.
4

Remote control

• Dispose leaked, deformed or corroded batteries by
appropriate protectives.
4.1

Activating the remote control

• Remove the shroud from the battery compartment by pulling out the tab.
The remote control is ready for operation.
4.2

Replacing the battery

1. Replace the empty battery as needed with a new one of the same type.
The battery compartment is located on the back of the remote control.
The insertion direction is marked on the product.
Battery type:
2. Dispose of the empty battery in a professional way.
Also read the chapter Disposal instructions.
5

Connecting

• Do not plug in a row.
• Never operate irons, heaters and similar devices with risk of fire on
radio-controlled sockets.
1. Insert the radio-controlled power socket into a well reachable safety
socket.
2. Connect 1 device of maximum 1100 W to the radio-controlled power
socket.
15
Battery hazards
The batteries are replaceable.
LR23A, 12 V
Overload