Velleman HQ Power VDSCD5000 Notice D'emploi page 4

6. Description
a. Main Unit
• Front Panel (fig. 1)
1. CD SLOT
Insert the disc here. If a CD is inserted and the player is ready for operation, the CD LED will glow.
2. OPEN / CLOSE
Push the EJECT button to stop and to eject the CD.
3. POWER SWITCH
Press to turn on the power.
• Rear Panel (fig. 2)
4. REMOTE CONTROL
Connect to the control unit using the included cables. Make sure that you connect player unit 1 to the
player 1 on the control unit and the same for player 2.
5. DIGITAL OUTPUTS
The output format is type 2, form 1, also known as S/PDIF. In order to use the digital outputs you must first
activate it through the PROGRAM features. Once activated you can not use variable pitch slider, the pitch
bend buttons or loop when active. If you wish to use the digital output of the unit, you must first set the
digital out mode or the output sampling rate will be incorrect.
6. AUDIO OUT SOCKETS
Analogue music signal. Connect to the respective input of your mixer.
7. VOLTAGE SELECTOR
Make sure that the indication corresponds to the available voltage.
8. AC CONNECTION
VDSCD5000_v3 4 VELLEMAN