Before Using For The First Time; Parts And Operating Controls - Siemens TT3A Série Mode D'emploi

en
Congratulations on purchasing this
Siemens appliance. You have acquired
a high-quality product that will bring
you a lot of enjoyment.
These operating instructions describe the
following different models:
● Long slot toaster
● Compact toaster
Please use this toaster solely for toasting or
heating sliced bread or for reheating bread
rolls on the warming rack.
Parts and operating
controls
1 Push-down/start lever
2 stop button with LED
3 Selector (for toasting level)
4 Toast slot
5 Switch (for integrated warming rack)
6 Warming rack
7 Crumb tray
8 Cable tidy
8
Before using
for the first time
● Remove any stickers or film.
● With the window open, operate the
toaster without bread in it at least three
times at the highest toasting level setting
and let it cool down.
Operation
(Figures a – l on the fold-out pages)
Important: Do not operate the toaster
without the crumb tray 7!
Toasting
● Unwind the power cable to the required
length and plug it in.
● Use the selector 3 to set the required
toasting level between 1 and 6. For a
medium, golden brown select level 3-4.
● Place the food to be toasted in the toast
slot 4.
● Press the push-down lever 1 down until it
engages. The LED on the stop button 2
lights up.
● Toasting ends when the food being
toasted is raised up. The LED on the
stop button 2 goes out.
Note: Push the push-down lever 1 up to
remove toasted items more easily. To end
the toasting process prematurely, press the
stop button 2.
Tip: If you toast only one slice, set the
toasting level lower than for two slices.
Warming cold bread or toast
● Set the required toasting level to .
● Insert the food being toasted and press
the push-down lever 1 down until it
engages.