Included Items; Description Of Parts; Technical Data; Safety Notes - ULTIMATE SPEED CRIC HYDRAULIQUE À ROULETTES Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Hydraulic Trolley Jack
Proper use
The hydraulic vehicle jack is intended for raising
and lowering motor vehicles. Other uses or
modification of the hydraulic vehicle jack shall
be considered as improper use and may lead
to injury or damage. The manufacturer will not
accept liability for loss or damage arising from
improper use. The product is not intended for
commercial use.
Note: Reclose the release valve
use!

Description of parts

Lifting handle
1
Lifting arm
2
Support plate
3
Carrying handle
4
Release valve
5
Lifting handle socket
6
Cover
7
Relief valve
8
Adapter
9
Hex bolt
10
Nut
11
Storing Bracket
12
Saddle
13

Technical data

Stroke:
135–342 mm
150–357 mm (with adapter )
Maximum load: 2000 kg
Hydraulic oil
grade:
SAE 10
Hydraulic oil
quantity:
115 ml
Maximum
force on lever:
380 N

Included items

1 hydraulic trolley jack
1 adapter
1 lifting handle
1 operating instructions
DANGER! Follow the instructions below to
avoid the threat of loss of life, injury, or
damage to the product etc.
after each
Always use axle stands and wheel chocks
5
in addition to your hydraulic vehicle jack.
Never work under a raised vehicle unless
you have taken additional safety precautions.
This is intended to prevent the vehicle from roll-
ing away, sliding off or overturning the jack.
Use the product on a solid, level surface
only. Using the product on an unstable or
uneven surface – such as a gravel surface –
may lead to the load slipping.
The person operating the jack must observe
the jack and the load during all movements.
Never work under the raised load if it has
not been made secure by suitable means.
Do not allow the hydraulic vehicle jack to
be used by uninstructed or inexperienced
persons.
Before using the hydraulic vehicle jack take
precautions to prevent the vehicle from rolling
away. Put the handbrake on, place the vehicle
in gear (with automatic gearboxes set to "P")
and chock the wheels.
Even with safety measures in place always
remain alert and make a visual check that
the support plate
the vehicle jacking point.
Make sure that no petrol, battery acid or
any other dangerous substance can flow out
of the vehicle when the vehicle is being lifted.
Check that no person or object is under the
vehicle before you lower it.

Safety notes

Ensure that you never exceed the
allowable (rated) load capacity.
2000
kg
is firmly seated against
3
GB/IE
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

275331

Table des Matières