Repetition; Edit Time During Shaking Operation; Cleaning & Servicing; Disassembly & Storage - Heidolph Multi Reax Mode D'emploi

change time rapidly. Depressing the Set Time  and Set Time  keys resets the timer to
000.

Depressing the Start / Stop key (H) starts shaking at the frequency selected with knob (B)
and for the time interval set before. Start LED turns ON.

Time lapse appears in a 3-digit display. Time LED turns ON.

Current shaking action may be discontinued with the Start / Stop key (H). Actual time
won't change. Hitting this Start / Stop key continues shaking at the moment it had been
discontinued.

In case of a power supply failure or interruption (item turned OFF), this factor is lost.

Hitting the Select key during timer-controlled operation, you may change display from
time to shaking frequency and vice versa.
Speed LED turns ON. Timer LED flashes to indicate timer operation mode.

Timer LED also flashes, when timer-controlled operation was discontinued with the Start /
Stop key.
C.

Repetition


Repeating last timer controlled operation does not require new time setting, as long as
you did not touch the master switch.
D.

Edit time during shaking operation


Time setting may be changed during shaking, while timer is running and even when timer
controlled operation was discontinued.

Memory timer will keep initial value in its memory.
Cleaning: wipe housing clean with a damp cloth (add some sort of mild liquid soap).
Note
To avoid damage to the surface finish, avoid using chlorine bleach, chlorine-
based detergents, abrasive substances, ammonia, rags or cleaning agents
containing metal particles.
The item is maintenance-free. Repair work is limited to technicians so approved or appointed
by Heidolph Instruments. Please call your local Heidolph Instruments Dealer or a Heidolph
Instruments Field Representative.
Disassembly
1. Turn item OFF and disconnect mains plug.
2. Remove all of the hardware arranged around the shaker to ease disassembly.
Forward & Store
1. We recommend to store the item and its components in its original box, or a similar
container that offers adequate protection against damage in transit. Tape the box
securely.
2. Store the item in a dry place.
Caution
Do not jolt or shake the item during transport.
CLEANING & SERVICING
DISASSEMBLY & STORAGE
21
IEI