Xoro HSD 8450 Manuel D'emploi page 89

Audio Setup Page
Test Tone
With the test tone you can check the wire connection to the speaker. The Player produces
for every speaker a test tone and displays on the screen on which speaker is the test tone
available.
Note:
The Test Tone can be uses only when the menu DOWNMIX is set by OFF.
SPDIF Output
The setting is responsible for the digital audio output like Dolby Digital or DTS by the coaxial
or optical audio output to the AV Receiver or AV Amplifier. The options are:
SPDIF OFF:
SPDIF/PCM:
SPDIF/RAW:
LPCM Output
During the development by High Definition Video was also developed the high quality Audio.
Since a couple of years the standard format is LPCM with a sampling rate of 192 kHz and a
sample size of 24 bit.
For compatibility reasons the player is able to educe the sampling rate, because not all and
specially older Digital-Analogue-Converter) can not handle 192 kHz.
The options by LPCM output are 192k, 96k and 48k.
Note:
The option is only than active, when you uses PCM output in the SPDIF settings.
SETUP
Deactivates the digital output
Output of digital audio in the PCM format
Output of all kind of digital audio formats.
HSD 8450
37