Assembly - Sage the Nutri Juicer Cold Plus Guide Rapide

Assembly

Before first use
Before using your juicer for the first time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the power cord is unplugged.
Wash the filter bowl surround, filter basket, juicer
cover, food pusher, pulp container and juice jug
and lid in warm, soapy water with a soft cloth.
Rinse and dry thoroughly.
1. Place motor base on a flat, dry surface
such as a countertop. Ensure that the
juicer is switched to OFF at the dial,
and the power cord is unplugged.
2. Place filter bowl surround on top
of the motor base.
3. Align the arrows at the base of the
stainless steel filter basket with the arrows
on the motor drive coupling and push
down until it clicks into place to create
a secure fit with the motor base.
6
4. Place the juicer cover over the filter bowl
surround, positioning the lower part of
the feed chute over the stainless steel
filter basket.
5. Raise the safety locking arm up and locate
into the two grooves on either side of the
juicer cover.
6. The safety locking arm should now be
in a vertical position and locked into place
on top of the juicer cover.