Table des Matières
Publicité
Using a computer
Connecting the camera to a computer
Connecting to a computer
1
Insert a fully charged battery pack into the camera, or connect
the camera to a wall outlet (wall socket) using an AC adaptor
(sold separately).
2
Turn on the camera and the computer.
3
Check that [USB Connection] under
[Mass Storage].
4
Connect the camera to the
computer.
• When you connect the
camera to the computer for
the first time, the procedure
for recognizing the camera
may start automatically on
the computer. Wait until the
procedure is finished.
(Setup) is set to
To a USB
terminal
To the Multi/Micro
USB Terminal
Micro USB cable (supplied)
GB
GB
55
Publicité
Table des Matières
