Available Configuration For 301C - Honeywell Microwatt 420I Manuel De L'utilisateur

Description

Available Configuration for 301C

Available Configuration for 301C
This function is only available with recent versions (2005 onward).
When used with the 301C, it is in listening mode only; the broadcast
mode must be activated on the controller side.
Addresses can be selected in groups of 8 (i.e. 1 - 8, 9-16 and so on
until 89-96. See DIP Switch settings for further details). There are also
three (3) statistic values available for selected groups: Minimum,
Maximum and Average.
.Each converted signal is associated to the following outputs;
Output J20: Average;
Output J18: Minimum;
Output J16: Maximum.
14 420I User Manual
511399
Honeywell
2/07