Recommended Tools And Supplies; Rack Kit Contents - Dell PowerEdge 850 Guide D'installation

Recommended Tools and Supplies

• #2 Phillips screwdriver
• 3/8-inch wrench or nut driver (if changing bracket to flush-mount configuration)
• Masking tape or felt-tip pen to mark the mounting holes

Rack Kit Contents

The two-post rack kit includes (see Figure 1-10):
• One pair of mounting rails
• 12-24 x 0.5-inch pan-head Phillips screws (8)
• Releasable tie wraps (2) (not shown in Figure 1-10)
Figure 1-10. Two-Post Rack Kit Components
12-24 x 0.5-inch pan-head
Phillips screws (8)
mounting rails (2)
flush-mount mounting flange
center-mount mounting flange
15.24-cm (6-inch) wide, flush-mount, threaded studs
7.62-cm (3-inch) wide, flush-mount, threaded studs
15.24-cm (6-inch) wide,
center-mount, threaded
studs
7.62-cm (3-inch) wide, center-
mount, threaded studs
adjustable mounting flange
Rack Installation Guide
19