Technical Description; Control Elements - Waeco PerfectCharge DC08 Notice De Montage Et D'utilisation

_DC Power Booster.book Seite 25 Mittwoch, 11. April 2007 8:31 08
PerfectCharge / PerfectPower
5

Technical description

The light weight and compact construction allows the converters to be easily
installed in mobile homes, commercial vehicles or motor and sailing vessels.
The transformers convert a 12 V
battery to a stable 12 V
The isolation of the input and output voltages means the output voltage can
be kept stable without interference from the input circuit.
Because the maximum output current is electronically regulated, the charge
converters can be used to charge batteries to generate electricity in cars or
on boats.
The devices are equipped with protection against shorting and overloading.
If the protective function triggers, the device switches off and then switches
on again when correctly connected.
5.1

Control elements

No. in fig. 1,
page 3
1
2
3
4
5
6
or 24 V
DC
or 24 V voltage for connecting to equipment.
DC DC
Explanation
Output terminals
"Power On" LED: There is voltage at the output
terminals on the converter. The converter is ready
for use.
"Battery Low" LED: The input battery is no longer
sufficiently charged.
"Overload" LED:
If a consumer is connected: The converter is
shorted or overloaded.
If connected as a charger: The converter is in the
full current charging phase.
Air outlet
Main switch
Technical description
supply from a car or boat
DC
25