Maintenance And Care; Notes Regarding Environmental Protection; Contact Information - EUFAB TÜV GS Manuel De L'opérateur

Tightening a screw/nut with a set torque:
Caution:
Do not use ball joints or cardan joints and avoid the use of long extensions so that the set value is not distorted.
Put the required tool onto the drive square of the torque wrench. Put the tool onto the screw or nut. Tighten evenly but not jerkily
until you hear a click, both acoustically and in the hand.
Caution:
Finish the tightening process immediately after the "click", especially with small torque settings.
Caution:
Release the torque wrench release mechanism after finishing work. To do this, turn the handle back beyond the
smallest adjustable torque.

6. MAINTENANCE AND CARE

• Only store the torque wrench in a relaxed state.
• Store the torque wrench in its case in a dry place.
• Before it is used the next time, loosen the torque wrench several times with a small torque in order to ensure sufficient
lubrication of the mechanism.
• Only clean the torque wrench with a dry cloth. Never allow liquids to get into the torque wrench.

7. NOTES REGARDING ENVIRONMENTAL PROTECTION

Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisati-
on or other forms of reusing waste equipment!

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
8
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com