Safety Regulations; Technical Data; Intended Use - HERKULES 42.599.10 Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Anleitung_LHS_210_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig.1)
1
On/Off switch
2
Speed regulation
3. Lock for telescopic length extension
4. Telescopic length extension
5. Dust extraction holder
6. Dust extraction hose
7. Sanding/grinding disk
Items supplied
Drywall Power Sander
6x Abrasive paper
4m Extraction hose
1 pair carbon brushes
Screwdriver
Brush ring

3. Intended use

The drywall power sander is designed for
sanding/grinding of smoothed dry mortarless walls,
for interior ceilings and walls, as well as to remove
residual hangings, colour, coverings, glue and loose
plaster. The appliance can also be used to grind/sand
floors.
19.05.2009
8:25 Uhr
Seite 9
The appliance may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator - not the
manufacturer - will be liable for any damage or
injuries caused as a result thereof.
Please note that our appliance has not been
designed for use in commercial, trade or industrial
applications.
Our warranty will be voided if the appliance is used in
commercial, trade or industrial businesses or for
equivalent purposes.

4. Technical data

Mains connection
Power input
Oscillation rate
Abrasive paper size
Protection class:
Weight
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L pA Sound pressure level
K pA Uncertainty
L WA Sound power level
K WA Uncertainty
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Overall oscillation value determined according to EN
60745
Vibration emission value ah ≤ 2.5 m/s²
Caution:
The vibration value changes according to the area of
application of the electric tool and may exceed the
specified value in exceptional circumstances.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
GB
230 Volt ~ 50 Hz
600 W
1000-2000 rpm
Ø 212 mm
II / ®
4.80 kg
75.5 dB(A)
3 dB
86.5 dB(A)
3 dB
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

01019Lhs 210

Table des Matières