Carbon Brushes; Disposal And Recycling - HERKULES 42.599.10 Mode D'emploi D'origine

Anleitung_LHS_210_SPK7:_

8.2 Carbon brushes

In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Caution: The carbon brushes should not be replaced
by anyone but a qualified electrician.
8.3 Servicing
There are no parts inside the appliance which require
additional maintenance.
8.4 Ordering replacement parts:
Please provide the following information on all orders
for spare parts:
Model/type of the appliance
Article number of the appliance
ID number of the appliance
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
8.5 Changing the brush ring (Fig. 9/10)
Loosen the six screws with a screwdriver.
Lift the brush ring carefully out with the screwdriver.
To assemble the new brush ring proceed in reverse
order.

9. Disposal and recycling

The appliance is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The appliance and its accessories are made of
various types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
19.05.2009 8:25 Uhr Seite 11
GB
11