Type Plate; Assembling The Appliance; Fitting The Handle - Medion MD 16906 Traduction De La Notice Originale

5.1. Type plate

NOTICE!
The type plate is located on the side of the appliance.
EU Version

6. Assembling the appliance

You will need a medium-sized Phillips screwdriver for assembly.

6.1. Fitting the handle

 Slide the cable guide (8) for the extension cable onto
the left side of the appliance handle (view from behind).
 Place the upper part of the appliance handle (8) onto
the bottom tube connector. Note that the recesses
of the tube connectors face inwards and the curved
ends point downwards. On delivery, the screws are
screwed into the wing nuts. Unscrew these.
 Secure the cable with a cable guide clip (4) on the
right upper side of the appliance handle (8).
 Select one of the holes on the lower part of the
handle to determine the height of the handle.
 Fasten the tube connectors and the upper part of
the appliance handle with the screws and wing
nuts (5, 10).
 Attach the second cable guide clip (4) together
with the cable on the lower part of the tube
connector.
 Insert the lower tube connector of the appliance
handle into the holes provided for this purpose on
the sides of the housing. Use a Phillips screwdriver
and fix the handle into place using the mounting
screws.
UK Version
DE
FR
NL
EN
85 of 98