geo-FENNEL FVE 100 Mode D'emploi page 15

EN
SETTING THE IMAGE ILLUMINATION
The standard illumination is 3.
With the buttons „+" and „-" the image illumination
can be adjusted. The lowest illumination is 0
(= LED does not light anymore), the maximum
illumination is 5.
ILLUMINATON INDICATOR ON / OFF
Press the buttons „+" and „-" simultaneously to
power on and off the illumination indicator.
The standard setting is „on" .
TV OUTPUT
Connect the TV cable (in the kit) with the monitor; plug the black end into the instrument and the yellow
into the monitor. Select TV OUT in the main menu and confirm with OK. Select the correct parameter
with the cursor and confirm with OK. Then, the unit automatically returns to the main menu.
15