geo-FENNEL FVE 100 Mode D'emploi page 14

EN
2) Image setting
Power on the instrument and press the MODE
button long to enter into the image setting mode.
Now i. e. brightness, contrast, definition, colour
etc. can be set.
Use the buttons „+" and „-" to move the cursor
to the selected menu. Confirm the menu selected
by pressing MODE. Fix the required image setting
with the buttons „+" and „-" . Confirm the value set
by pressing MODE.
After having made all settings move the cursor to
EXIT and confirm with MODE. Now this menu is
closed.
AUTOMATIC IMAGE FORMAT CONVERSION (PAL / NTSC)
The instrument automatically recognizes the image format when it is powered on for the fist time and
enters into the corresponding standard mode.
ATTENTION:
This recognition only works when the instrument is powered on for the first time. The standard setting
is PAL.
14