Switch And Indicators; Operation And Use; Installation; Adjusting The Temperature - Electrolux TG 092 Notice D'utilisation

Masquer les pouces Voir aussi pour TG 092:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Switches and indicators
A) On/off indicator
B) Thermostat and on/off switch
C) Quick freeze indicator
D) Acoustic signal stop and quick
freeze switch
E) Alarm indicator

Operation and use

Installation

Insert the plug into the socket. In order
to switch on the product, turn the
thermostat (B) to a temperature lower
than << -16 °C >>. The green
indicator will light up and the red
indicator will blink. The lighting up of
the on/off indicator (A) means that the
product is switched on. The blinking
of the red indicator means an
improper temperature in the freezing
compartment.
intermittent sound can be heard,
which can be stopped by pressing
button (D) once. You can switch off
the freezer by turning the thermostat
(B) in position <<

Adjusting the temperature

The internal temperature of the
freezer is regulated electronically
through five temperature positions
and a switch-off <<
Position << -16 °C >> indicates the
highest (least cold) temperature, while
position << -24 °C >> is for the lowest
(coldest) temperature. Rotate the
green
yellow
In
addition,
>>.
>> setting.
thermostat in the desired position.
In general, it is best to set the
thermostat to << -18°C >> but, for the
purpose of temperature setting, you
should also consider
the temperature of the room where
the product is installed,
the frequency of door openings,
red
the volume of food to be stored in
the product,
the location of the product.
Therefore, you should consider all
these factors and you may have to do
some testing for finding the best
temperature. If you want a lower
temperature, turn the thermostat into
a position of higher number or, vice
versa,
temperature, you should set a position
of lower number. Please allow 24
hours for the freezer temperature to
stabilize between two adjustments.

Alarm (red) indicator

The temperature alarm indicator (E)
will light up when the internal
temperature of the freezer increases
to a level (above -12°C) where the
long-term conservation of the foods in
not ensured. Please note that, when
an
switching on the freezer for the first
time, the alarm indicator will blink until
the internal temperature has reached
a
level
conservation of frozen food.

Temperature problem:

Under normal operating conditions,
the internal temperature of the freezer
will ensure the long-term conservation
of the stored food. When such
temperature rises above a certain
level (-12°C), it will trigger an acoustic
and light alarm. The light alarm is a
continuous red light (E), while the
acoustic alarm is an intermittent
GB
if
you
need
required
for
electrolux 57
a
higher
the
safe

Publicité

Table des Matières
loading

Table des Matières