System Setup; General Setup Page - AudioSonic DV-1823 Mode D'emploi

We highly recommend that Files be tested and Trial & Error" be used to find the best
compromise between quality and file size for encoded files.
Play USB and SD/MMC/MS Card
1. Plug in the USB device noting correct orientation. Press [DVD/SD/USB], then
choose USB to select the content.
2. Insert a memory card to the SD/MMC/MS slot. Press [DVD/SD/USB] and select SD
to play memory card.

SYSTEM SETUP

1. Press "SETUP" on the remote to bring up the SYSTEM SETUP MENU.
2. Press the or buttons to go to or return to the required settings page.
3. When the required page is shown press the "OK" button to enter the page.
4. Use the or buttons to navigate to the feature to be changed and then press
the button to enter the submenu.
5. Use the or buttons to select the submenu item and then press the "OK"
button to confirm.
6. Press the button to return to the previous menu or press the "SETUP" button to
close the Setup Screen.
Note: Not all discs contain these features. Some features are disc dependent.

GENERAL SETUP PAGE

TV Display
• 4:3: When the player outputs signal to a normal monitor. Wide-screen images are
shown on the screen. But with some parts cropped automatically.
• Normal / LB: Normal/LB: When the player outputs signal to a normal monitor,
a normal picture is shown on the screen with a black strip at both the top and
bottom of the screen.
• 16:9: Wide: When the player outputs signal to a wide screen monitor, a wide
picture is shown on the full screen.
Angle Mark
• ON: The screen will show the angle mark icon. (If an angle option is available).
• OFF: The screen will not display the Angle Mark.
OSD Language
You can choose one out of several different languages as the OSD setup language
Captions
• ON: Captions are displayed. (If an captions available).
• OFF: The screen will not display captions.
Screen Saver
• ON: Enables screen saver.
• OFF: Disables screen saver (off ).
Note: The DVD player will enter the Screen Saver mode after approximately five
minutes if the same image remains on the screen.
Last Memory
• ON: The unit will return to the last position on the disc.
• OFF: The unit will not return to the last position on the disc.
AUDIO
Speaker Setup
Downmix
• LT/RT: RIGHT/LEFT Channel: Mixes a 5.1 Ch audio signal to 2 audio channels and
then outputs to the left and right speakers.
• Stereo: Outputs a stereo signal to the left and right speakers.
DOLBY
Dual Mono
• Stereo: Left/Right channel audio will be played back by the Left/Right speakers.
• L-Mono: Playback of Left channel audio only.
Instruction Manual EN
9