Design And Function; Transport, Packaging And Storage - WIKA A-AS-1 Mode D'emploi

4. Design and function / 5. Transport, packaging and storage

4. Design and function

4.1 Description
Model A-AS-1: Universal LED attachable indicator
■
Model WUR-1: LED attachable indicator for UHP applications
■
4.2 Scope of delivery
LED attachable indicator
■
68 mm mounting nut
■
75 mm mounting nut
■
Sealing
■
Operating instructions
■
Cross-check the scope of delivery with the delivery note.

5. Transport, packaging and storage

5.1 Transport
Check the LED attachable indicator for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -30 ... +85 °C
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Potentially explosive environments, flammable atmospheres
■
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1
GB
11