Rona 2009696 Manuel D'utilisation page 21

OPERATING INSTRUCTIONS
STORAGE
Remove and clean any debris from the outside
of the edger and inside of guard before storage.
See MAINTENANCE section. If necessary, the
edger may be stored by hanging on a hook by
its handle.
CAUTION: DO NOT HANG EDGER BY THE
SWITCH TRIGGER OR POWER CORD!
Note: Do not store the tool on or adjacent to
fertilizers or chemicals. Such storage can cause
rapid corrosion.
PREVENTING CORROSION
Fertilizers and other garden chemicals contain
agents that greatly accelerate the corrosion
of metals. If you use the tool in areas where
fertilizers or chemicals have been used, the
tool should be cleaned immediately afterwards.
Wipe all exposed parts with a damp cloth.
You may lubricate only metal parts with a light
petroleum based oil. When cleaning, DO NOT
immerse tool in water or squirt it with a hose.
MAINTENANCE
Use only mild soap and damp cloth to clean
the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized
service centers or other qualified service
organizations. Use only identical replacement
parts. Inspect and thoroughly clean your edger
at the beginning of each edging season for
longer life and better performance.
A
21