Port Replicator Problems; Hard Drive Problems - Fujitsu LIFEBOOK E751 Mode D'emploi

Problem
LIFEBOOK notebook fails to
recognize DVD/CD-RW/CD-
ROM's.
(continued)
The drive access indicator
on the Status Indicator
Panel blinks at regular inter-
vals with no disc in the tray
or the drive is not installed.

Port Replicator Problems

Note: Be sure to power down your LIFEBOOK notebook before adding a printer to the Port Replicator parallel port.
Notebook does not turn on
when installed in the
optional Port Replicator

Hard Drive Problems

You cannot access your
hard drive.
Possible Cause Possible Solutions
Wrong drive designator Verify the drive designator used by the application is the same as
was used for the disc in the one used by the operating system. When the operating system
the application. is booted from a DVD/CD, drive designations are automatically
adjusted. Note that the drive designation can be changed with the
Disk Management tool located at Administrative Tools >
Computer Management.
DVD/CD-RW/CD-ROM Wipe the disc with a non-abrasive CD cleaning cloth and reinsert.
is dirty or defective. It if still will not work try another disc in the drive.
The Windows auto This is normal. However, you may disable this feature.
insertion function is
active and is checking to
see if a disc is ready to
run.
Port Replicator AC Provide power to the Port Replicator.
adapter is not plugged
in.
Notebook is not properly Remove and re-dock your LIFEBOOK notebook.
seated in port replicator.
The wrong drive desig- Verify drive designator used by application is in use by the operat-
nator was used by an ing system. When the operating system is booted from a CD, drive
application when a boot- designations are automatically adjusted.
able disc was used to
start the notebook.
Security is set so your Verify your password and security settings.
OS cannot be started
without a password.
93 - Troubleshooting Your LIFEBOOK