Ricatech RMC400 Mode D'emploi page 5

To Fast Forward or Rewind
1 While playback is stopped, press the FAST FORWARD or REWIND button to fast forward or rewind
the cassette.
2 Once the desired position is reached on the cassette, press the STOP/EJECT button.
3 Press the PLAY button to begin play.
NOTE: The cassette player plays the side of the cassette facing away from the unit. To play the other
side of the cassette, you must eject the cassette and turn it over.
Playing a CD
1 Press the FUNCTION button to set the unit to CD mode.
2 Press the EJECT button to open the CD tray. Insert a CD into the tray with the label side facing up.
3 Press the EJECT button again to close the CD tray. The display will show ―CD Load‖ for a few seconds
and playback will automatically begin.
4 To skip forwards or backwards through the tracks on a CD, press the Forward Skip or Backward Skip
buttons.
5 To fast forward or rewind through a track, press and hold the Forward Skip or Backward Skip buttons
on the control panel. Release the buttons once you reach the desired position on the track. To use the
remote to fast forward or rewind, press Forward search or Backward search one time. Once the desired
position is reached, press the button again to resume play.
Repeat Playback
1 To repeat a single track, select the desired track number and press the REPEAT button once. " Repeat
" will show on the display. Press the PLAY button and the selected track will repeat once it is finished.
2 To repeat a whole CD, press the REPEAT button twice. The display will show "Repeat All". Once the
disc is finished, it will start over again from the beginning.
3 To turn off the repeat feature, press the REPEAT button again. The repeat display will disappear from
the LCD.
Random Play
1 While playing a CD, press the RANDOM button on the remote control. ―Random‖ will show on the LCD
display. The unit will randomly select songs from the CD.
2 To cancel Random playback, press the Stop button.
Programmed Playback
1 Make sure the CD is stopped.
2 Press the PROGRAM button. ―MEMORY‖, "PGM 1" will show on the display,
flash.
3 Press the or buttons to select a desired track.
4 Press the PROGRAM button twice to store the selected track number, ―MEMORY‖ will stop flashing
now.
5 Repeat steps 3 and 4 above to program additional tracks into memory.
6 When all the selected tracks have been programmed into memory, press the CD Play/Pause button to play
the disc in the designated order.
NOTE: Maximum of 35 tracks can be programmed into memory.
Playing MP3 CD's
This unit will play CD's recorded in MP3 format. All the controls and functions work the same as a regular CD.
Listed below are features and instructions that are unique to playing a MP3 CD.
Folder/Album Playback
If your MP3 CD is separated into folders, follow the steps below to access the folders.
1 While the CD is stopped, press the FOLDER+ or the FOLDER- buttons to advance forward or backwards
through the folders on your disc.
2 Once the desired folder is reached, use the Forward Skip or Backward Skip buttons to select the desired
track.
3 Press the PLAY to begin playback of the selected track.
CD Information
If the MP3 CD has track information stored on it, such as artist and title, the LCD will display that information
and ―MEMORY‖ will