Ricatech RMC400 Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous
radiation exposure..
The lighting flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert user to
the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute
risk of electric shock to persons.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Frequency Range
Power Supply
Speed
Speaker
Replacement Needle
•DESIGN AND SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE.
Unpacking
1 Remove packing materials from unit.
NOTE: Save all packing materials.
2 Remove plastic bag covering radio.
3 Remove AC ADAPTOR from packing.
4 Remove tie from AC ADAPTER.
5 Open lid and remove styrofoam shipping material from turntable.
6 Remove black tie-wrap from under the tone arm.
7 Remove tape and white protective needle cover by gently pulling
them towards the front of the unit.
8 Turn the TURNTABLE SUSPENSION SCREW clockwise until it is
all the way down. Do not force or over tighten it. This allows the
turntable to float on its shock absorbers.
9 Release tone arm hold down clip by gently pushing to the right.
This will unlock tone arm from its arm rest. Re-lock the hold down
clip when moving the unit to another location.
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER –
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
: AM 530 - 1600 KHz
: FM 88 - 108 MHz
: SWITCHING ADAPTOR AC 100-240V / DC 12V 3A
: 33 1/3, 45, 78 RPM
: 3‖ 1/2‖ 4ohm 5W x 2
: NP4
The exclamation point within an
equilateral triangle is intended to
alert user to the presence of
important operating and
maintenance (servicing) instruction
in the literature accompanying the
appliance.

Publicité

Table des Matières
loading

Table des Matières