Network / System Configuration Connection; Switching On - Vinten Active Guide De L'utilisateur

English

Network / system configuration connection

The network/system configuration port allows trained service personnel to update the system software. For
more information, please refer to the Active Serial Box Maintenance Manual (Publication Part No. V4039-
4990).

Switching on

Once all connections have been made, the Active Serial Box can be switched on using the power switch
(10). Once unit switched on, the 12-volt and 5-volt power indicators (1), (2) will illuminate. The status indi-
cator will initially illuminate steady green, and then begin flashing to signify successful communication with
the lens. If the connection is lost, the status indicator will flash red until communication is re-established.
13