Before carrying out any cleaning or maintenance operations, always unplug the machine from the power line.
Carry out any stainless steel equipment part maintenance by complying with the following instructions:
clean the surfaces thoroughly with a damp cloth; water and soap or common detergents can be used
as long as they do not contain any abrasives, staining agents or chlorine;
only wipe in the satin finish direction;
rinse with water only and wipe perfectly dry;
Cleaning is important to ensure that the equipment characteristics are preserved.
Caution: When cleaning the equipment, never use direct pressurised water jets which could cause infiltrations
and damage the internal parts of the equipment. Exclusively use a damp cloth.
Maintain the electrical parts of the cabinet by regularly checking that the electric input cable is intact; replace
the cable if it shows signs of wear-and-tear. Arrange for general equipment overhauling at least once a year.
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
47 / 56