Lega 8230 Guide D'instructions page 42

1 INTRODUCTION
The purpose of this manual is to supply information regarding:
Use of the Honey Liquifier Cabinet and of the Drier Cabinet;
Technical specifications;
Handling, installation and assembly instructions;
Information for the machine operators;
Maintenance operations;
Solutions for possible problems.
This manual should be intended as forming an integral part of the Honey Liquifier Cabinet - Drier Cabinet
and as such, it should be kept with care for future reference throughout the machine life.
The manufacturer shall not be held responsible in the following cases:
not recommended use of the Honey Liquifier cabinet – Drier Cabinet;
incorrect installation or installation not in accordance with the procedures described in this manual;
power supply faults;
major failure to comply with maintenance requirements;
unauthorised changes or operations;
use of non-original spare parts or spare parts that are not model-specific;
failure to comply with the supplied instructions, either wholly or in part;
Electric appliances can be dangerous for human health. The applicable laws and regulat ions in force must
be observed during the equipment installation and use.
2. IDENTIFICATION - MARKING
In order to make the best use of this manual, the machine model in your possession must be identified
according to the indications provided on the machine data plate.
(1)
(2)
(5)
Figure 1 – Example of machine data plate
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
(3)
(6) (7)
1 – Model
2 – Code
3 – Serial number
4 – Date of manufacturing
5 – Alternate voltage supply
6 – Line frequency
(4)
7 – Max absorbed power
42 / 56