La Sommeliere LS50.2Z Notice D'utilisation page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect the appliance.
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
To ensure proper electrical connection, follow the recommendations given in the present
manual.
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the
packaging. It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with
walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the appliance is installed.
Power saving
To limit the electricity consumption of your appliance:
▪ Install it in an appropriate place (see "Installing your appliance")
▪ Leave the doors open as little time as possible.
▪ To ensure that the appliance operates properly, clean the condenser regularly (see
"Routine servicing of your appliance").
▪ Regularly inspect the door seals and ensure that they are still closing properly. If this is
not the case, contact your after-sales service.
Trouble shooting
Any electrical work should be carried out by a qualified and skilled technician.
The appliance should be repaired by an accredited repair center, using only manufacturer's
original spare parts.
The appliance is designed for home use only. The manufacturer declines any liability
whatsoever in the case of other use
23

Publicité

Table des Matières
loading

Table des Matières