LIVARNO LUX LAH 55 A2 Mode D'emploi page 54

TAKE NOTE
► Do not touch the bulb with your bare fi ngers, use a lint-free soft cloth.
Fig. Changing the bulb
♦ Switch the appliance off with the On/Off switch
♦ Ensure that the mains power adapter resp. car adapter is not plugged into
the charging socket
♦ Loosen the retaining ring of the spotlight
and then removing it from the appliance.
♦ Remove the cable
♦ Remove the bulb from its socket
of the connecting cable.
♦ Insert a new bulb of the same type (see technical data) into the socket
and reattach the connection cable with the plug connector
♦ Secure the bulb with the retaining clip
with the screw and the nut on the bracket
♦ Replace the retaining ring of the spotlight
restraints of the ring engage and grip into the recesses of the housing. Lock
the retaining ring by turning it slightly anti-clockwise.
LAH 55 A2
.
12
and the retaining clip
and carefully loosen the plug connector
and fasten them as per the cable
+ .
6 7
by turning it slightly clockwise
from the bracket .
.
.
on the appliance so that the
GB
51