Attaching a Lens Hood
When attaching the lens hood (flower shape) supplied with the
interchangeable lens (S-R28200)
Hold the lens hood with your fingers placed as shown in the picture.
Do not hold the lens hood in a way that twists or bends it.
0
1
1
Align mark A (
2
Rotate the lens hood in the direction of the arrow to align mark B (
hood with the mark on the tip of the lens.
When removing the lens hood, rotate while pressing the lens hood button C.
0
0
When carrying, the lens hood can be attached in the reverse direction.
1
Align mark B (
2
Attach the lens hood by rotating it in the direction of the arrow until it clicks.
2
) on the lens hood with the mark on the tip of the lens.
) on the lens hood with the mark on the tip of the lens.
) on the lens
DVQW1926 (ENG)
DVQW1926 (ENG)
7
7