Sony SU-PF3M Mode D'emploi page 10

2 Run the cables equally through the openings
at the top of the right and left pillars.
Put the cables for the external
equipment installed on the glass
shelf into the rail as shown
below.
Cables
Glass shelf
3 Place all cable covers back in their positions.
2
1
10
(US)
Rail
Align the outside of the cable
cover with the groove of the
pillar, and then give the cable
cover a slight press toward the
glass shelf to fit it in position.
Check the operation of
the woofer speaker
Check the operation of the
woofer speaker.
This Floating Stand is equipped with a woofer
speaker. Turn on the power of the TV after
installing it on the Floating Stand and check if
the woofer speaker is operating properly. If the
TV is not properly installed, no sound will be
heard from the woofer speaker.
Note
The distance between the TV and the wall may
affect how the bass sounds from the speaker. If you
need to adjust the sound quality (bass frequencies)
after installation, change the distance between the
stand and the wall or adjust the woofer level
setting from the TV's menu option. See the
instruction manual of the TV for more details on
adjusting the sound quality.