Oxford 15-1417 Mode D'emploi page 20

B) Cleaning waterproof rechargeable shavers with up to three blades
Remove the foil/foil holder and place in the cleaning tank as described
under A.
Hang the shaver, blade downwards, from the holder in the cover.
Fill the tank with water up to the MAX mark. Add cleaning concentrate
if necessary.
The shaver is now hanging from the cover. Close the cover and hold
the shaver in place by fixing it to the dock (3).
Close the cover and connect the device's plug to the plug socket.
Important: use mains voltage of 220-240 V
(see label on underside of device).
Press start to begin the cleaning cycle. The blue light on the inside
will come on.
After 5 minutes the cleaning cycle will end and the blue LED light will
go out. To stop the cleaning cycle before it is complete, press the stop
button.
20