Oxford 15-1417 Mode D'emploi page 19

Types of usage
A) Cleaning small parts
Removable shaving parts (e.g. outer foils, shaver heads, razor blades, etc.) and other small
metal items (e.g. rings, earrings, piercings, etc.) can be placed directly into the tank.
Always place the white basket insert in the stainless steel tank first.
Then place the small items in the middle of the insert.
Fill the tank with water up to the MAX mark. Using the measuring
cup, you can add Oxford® SHAVER CLEAN concentrated cleaner in the
ratio of 1:20.
Close the lid and connect the plug to the plug socket.
Important: use mains voltage 220-240 V
(see label on underside of device).
Press the start button to begin the cleaning cycle. The blue light
on the inside will come on.
During the cleaning cycle a vibration noise will be audible.
This is a normal part of the ultrasonic cleaning process.
After 5 minutes the cleaning cycle will end and the blue LED light will
go out. To stop the cleaning cycle before it is complete, press the stop
button.
19