Before Use; Preparation For Use - Oxford 15-1417 Mode D'emploi

Before use

Unpack and set up device:
Carefully remove the device from the box and remove all packaging. Check the device for
damage and ensure all parts are present.
Place the ultrasound cleaner on a firm and level surface, which should be easy to clean, well lit
and easily accessible. Do not place the device on or near surfaces that could become hot (e.g. on
or near an oven).

Preparation for use

Open the cover, remove the transparent transport cover and check that the stainless steel tank
is clean.
18
If not, open the lock and remove the tank.
Clean the tank under running water and shake off excess water.
Place the tank back in the device and close the lock
The device can only be switched on when the tank is in place and the
lock button is in the position