Respirex CHEMPROTEX 300 COMBI Mode D'emploi page 9

• Physical Properties
Tests carried out under laboratory conditions by independent accredited laboratories.
Test Method
EN 530 Meth 2
EN ISO 7854 Meth B
EN ISO 9073-4
EN ISO 13934-1
EN 863
†† EN class specified by EN 14325:2004, the higher the class number the better the performance.
• Whole Suit Performance
Tests carried out under laboratory conditions by independent accredited laboratories.
Standard
EN 14605:2005+A1:2009
EN 14605:2005+A1:2009
EN 13982-1:2004+A1:2010
EN 13034:2005+A1:2009
EN 14325:2004
EN1149-5:2006
§ EN class specified by EN 14325:2004, the higher the class number the better the performance.
¶ EN1149-5:2008 requires a surface resistance of less than or equal to 2.5 x 10
EN1149-1.
Property
Abrasion resistance
Flex cracking resistance
Trapezoidal tear resistance
Tensile strength
Puncture resistance
Type 3 Liquid jet test
Type 4 Liquid spray test
Type 5 Protection against airborne solid particulates
Type 6 Liquid spray test (mist test)
Seam strength
Surface resistance (Ω)
EN Class††
1 of 6 (visual assessment)
Property
Ω, on at least one surface, tested according to
9
5
6 of 6
4 of 6
3 of 6
2 of 6
Results
Pass
Pass
Pass
Ljmn,82/90 ≤30%,
LS,8/10 ≤15%
Pass
Class 4§
Pass¶
Face, Mean 3.5 x 10
Reverse, Mean 3.3 x 10
8
7