Switching On And Off - Viscount Cantorum VI Plus Mode D'emploi

User Manual
7. [PHONES] connector: Jack connector for connecting stereo headphones. The internal speakers are
turned off when the headset is connected.

2.3 SWITCHING ON AND OFF

Cantorum VI Plus is equipped with a low-power power supply mode, called Stand-By, which is useful for
the energy saving of the instrument.
When the [POWER ON] switch on the rear panel is set to "1", the instrument is initially placed in Stand-
By mode. To switch it on, press the [TEMPERAMENT] button and wait for the combination LEDs to
switch on sequentially, after which the instrument is configured as at the time of last shutdown.
After 30 minutes of inactivity, Cantorum VI Plus also automatically switches to Stand-By mode. It is
however possible to deactivate the automatic stand-by mode by following the instructions given in par.
6.7.
To turn the instrument off, you can place it in Stand-By by holding down the [TEMPERAMENT] button
until its LED is the only one on, or by using the [POWER ON] switch.
EN - 7