Stand Mounting - Fisher Scientific 150 Homogenizer Manuel D'utilisation

Push to lock into
Clamp
1. Slide the 150 Homogenizer into the
opening on the end of the post clamp
assembly and push it down firmly.
The unit will lock in place.
2. To release the motor, press the clamp
release button on the back of the
opening of the post clamp assembly
and lift the motor from the cradle.
3. Slide the post clamp assembly
down over the end of the post until
the clamp is at the desired height
and lock in place.

Stand Mounting

Release Button
Clamp
Clamp
Stand
Cat.No. 15340172
(sold separately)