Preparing For Use - DrBrowns Natural Flow Deluxe Mode D'emploi

4. A user programmable warming cycle. This appliance allows the user to
determine the appropriate heating time based on the starting temperature of
the formula and the size of the bottle and keeps that time stored in the unit's
memory. This results in a 1-button start function for quicker bottle warming.
5. A 4-button digital keypad to set time and turn the appliance on/off. The "last
time programmed" is stored in memory and is displayed when the appliance
is turned on. The LCD timer counts down. There is an audible 5-beep alarm
with flashing LCD when the heating cycle is complete.
6. A backlit display for use at night.
7. Automatic power off after 10 minutes.
8. Automatic over-heating shutdown switch.
9. A polarized plug.
10. Soft feet for stability.
11. Convenient cord storage on the bottom of the unit.
12. ETL listed.
UNPACKING:
When unpacking the appliance for the first time, carefully remove and dispose of
all packing materials. Simply snap the hinged lid in place making sure the parts
are fully engaged, and you're ready to start to use. (SEE FIGURE 1)
FIGURE 1

PREPARING FOR USE:

1. Position the Dr. Brown's Natural Flow
Warmer on any convenient flat surface. Be sure to place
it and the electrical cord out of the reach of children.
NOTE: Always ensure the appliance is unplugged
when inserting the water reservoir.
2. Remove the water reservoir from the right side of the
main housing.
3. Turn the water reservoir upside down so the small fill
opening is facing up. Fill the reservoir with water through
that opening. (SEE FIGURE 2)
4
®
Deluxe Bottle
FIGURE 2