Remote Controller; Muting Upon The Reception Of A Phone Call - Kenwood KDC-148 Mode D'emploi

When you press or hold the following button(s)...
Remote
Main unit
controller
—
SRC
SRC
VOL
Volume knob
5 / ∞
(turn)
ENT
Volume knob
(press)
—
AM– /
*
BAND
#FM+
ENT
—
4 / ¢ 4 / ¢
SCRL DISP —
— AUD
— ATT
EXIT

Muting upon the reception of a phone call

To use this feature, connect the MUTE lead to your telephone using a commercial telephone
accessory. (page 13)
When a call comes in, "CALL" appears.
The audio system pauses.
To continue listen to the audio system during
a call, press SRC. "CALL" disappear and the
audio system resumes.
Turns on.
Turns off if pressed and held.
Selects the available sources (TUNER, CD, AUX, STANDBY), if the
power is turned on.
• If the source is ready, playback also starts. "CD" is selectable only
when a disc is loaded.
Adjusts the volume level.
Selects items.
Confirms selection.
Enters [FUNCTION] settings.
Selects the FM bands (FM1/ FM2/ FM3) or AM.
Selects the next/previous folder. (Pressing BAND on the main
unit can only select the next folders.)
Pauses/resumes playback of a disc.
Mutes the sound while listening to a radio or an external
component connected to the auxiliary input jack.
Searches for a radio station.
+
Selects track/file.
Fast-forwards/reverses tracks if pressed and held. (Fast-
forwards cannot be performed using the remote controller.)
Changes the display information.
Scrolls the display information if pressed and held.
Enters clock adjustment mode directly (page 6) if pressed and
held while in clock display screen.
Enters [AUDIO CTRL] settings directly.
Attenuates the sound.
• To return to the previous level, press the button again.
Returns to the previous item.
Exit from setting mode.
• Press and hold
mode.
General operation
on the main unit will also exit from the setting
When a call ends, "CALL" disappear.
The audio system resumes.
5