Installation Options - Norcold Dc105 Manuel D'installation Et Du Propriétaire

Table des Matières
Les langues disponibles

Les langues disponibles

Blockage of air through these vents can cause:
- shortened life of the refrigerator compressor
- poor cooling performance of the refrigerator
- continuous operation of the refrigerator
- fast battery discharge
- void of the refrigerator warranty
Do not remove the bottom rails from the refrigerator cabinet. The
rails supply space under the refrigerator that is necessary for correct
ventilation.

Installation Options

Install a Decorative Door Panel
NOTICE
1. Remove the door from the refrigerator by remov-
ing the three screws that attach the door hinge to the
bottom of the refrigerator.
2. Remove the panel retainer by removing the four screws
that attach the panel retainer.
3. Gently pull the door panel out of the door.
4. Push a new door panel into the door slot.
CAUTION
!
5. Put the panel retainer in the original location and at-
tach with four screws.
6. Put the door in the original location and tighten the
three screws.
The decorative door panel must be 2.0 mm (0.08 inches) or less in
thickness.
Do not over-tighten the screws
and bolts.
Screws
Door Panel
12
Door Hinge
Bolts
Panel Retainer
Table des Matières
loading

Table des Matières