Roast; Bake - Ninja Foodi LG450CCO Guide D'utilisation

USING THE NINJA® FOODI™ SMART GRILL – CONT .

Roast

1 Place cooking pot in the unit with the
indent on the pot aligned with the bump
on the main unit. Ensure the splatter
shield is in place, then close the hood.
2 Press the ROAST button. The default
temperature setting will display. Use the
set of arrows to the left of the display
to adjust the temperature up to 425°F.
NOTE: Convert traditional oven recipes by
reducing the temperature by 25°F. Check
food frequently to avoid overcooking.
3 Use the set of arrows to the right of the
display to adjust the cook time, in 1-minute
increments up to 1 hour and 5-minute
increments from 1 to 4 hours, or, if using
the thermometer, refer to the Using the
Foodi™ Smart Thermometer section.
14
ninjakitchen.com
4 Press START/STOP to begin preheating.
The progress bar will begin illuminating. It
will take approximately 3 minutes for the
unit to preheat.
NOTE: While preheating is strongly
recommended for best results, you can
skip it by pressing the PREHEAT button.
"ADD FOOD" will appear on the display.
Open the hood and place ingredients
in the cooking pot. Once the hood is
closed, cooking will begin and the timer
will start counting down.
5 When preheating is complete, the unit
will beep and "ADD FOOD" will appear
on the display.
6 Open the hood and place ingredients
in the pot. Once the hood is closed,
cooking will begin and the timer will
start counting down.
NOTE: If you would like to use the
thermometer just to check your food's
internal doneness, press thermometer
button for 2 seconds and the food's
internal temperature will appear on the
screen. Press and hold button again to
exit mode.
7 When cook time is complete, the unit will
beep and END will appear on the display.

Bake

1 Place cooking pot in the unit with the
indent on the pot aligned with the bump
on the main unit. Ensure the splatter
shield is in place, then close the hood.
2 Press the BAKE button. The default
temperature setting will display. Use the
set of arrows to the left of the display
to adjust the temperature up to 400°F.
NOTE: Convert traditional oven recipes by
reducing the temperature by 25°F. Check
food frequently to avoid overcooking.
3 Use the set of arrows to the right of the
display to adjust the cook time, in 1-minute
increments, up to 1 hour and in 5-minutes
increments from 1 to 2 hours, or, if using
the thermometer, refer to Using the
Foodi™ Smart Thermometer section.
4 Press START/STOP to begin preheating.
The progress bar will begin illuminating. It
will take approximately 3 minutes for the
unit to preheat.
NOTE: While preheating is strongly
recommended for best results, you can
skip it by pressing the PREHEAT button.
"ADD FOOD" will appear on the display.
Open the hood and place ingredients
in the crisper basket. Once the hood is
closed, cooking will begin and the timer
will start counting down.
5 When preheating is complete, the unit
will beep and "ADD FOOD" will appear
on the display.
6 Open the hood and add ingredients
to the pot or set the bake pan directly
in the pot, and close the hood to start
cooking. Once the hood is closed,
cooking will begin and the timer will
start counting down.
Bake pan
not included
NOTE: If you would like to use the
thermometer just to check your food's
internal doneness, press thermometer
button for 2 seconds and the food's
internal temperature will appear on the
screen. Press and hold button again to
exit mode.
7 When cook time is complete, the unit will
beep and END will appear on the display.
ninjakitchen.com
15