Hama 00124506 Instructions De Fonctionnement page 2

Operating instruction
Controls and Displays
1. Status LED
2. USB connection
3. Micro USB plug
4. Rearof charging cradle
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these
instructions in a safe place for future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
This symbol is used to indicate safety instructions or to draw your attention to specific hazards
and risks.
This symbol is used to indicate additional information or important notes.
2. Package Contents
Charging station with Micro USB plug and USB port
2 self-adhesive spacers
These operating instructions
3. Safety Notes
The product is intended for private, non-commercial use only.
Use the product for its intended purpose only.
* Do not operate the product outside the power limits given in the specifications.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Do not drop the product and do not expose it to any major shocks.
Keep this product, as all electrical products, out of the reach of children!
* Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately according to locally applicable regulations.
* Do not modify the product in any way. Doing so voids the warranty.
* Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect the product's functionality.
* Do not continue to operate the device if it becomes visibly damaged.
4. Startup and Operation
* Before connecting a terminal device, check whether the power output of the charger can
supply sufficient power for the device.
* Ensure that the total power consumption of all connected terminal devices does not exceed
2100 mA.
* Please refer to the instructions in the operating manual of your terminal device.
* The charger is suitable for a mains voltage of 100-240 V and can be used around the world.
Please note that a country-specific adapter may be necessary.
* You can find an appropriate selection of Hama products at www.hama.com.
* Plug the charger into an approved and easily accessible electrical socket
* When the power supply is active, the status LED (1) lights up in blue. The charger is now ready
for use.
* Connect the terminal device to be charged to the USB port (2) directly or using a suitable USB
cable.
* Alternatively, connect your terminal device to the Micro USB plug (3)