Warranty Regulations - i-tec MAG1000 Mode D'emploi

Warranty regulations

1. We recommend that the purchaser fills in the light blue warranty validation card, stamped
by the retailer, and posts it to the manufacturer immediately after purchase.
2. In the event of repairs under warranty, the purchaser must fill in all parts of the green service
card and send it to the manufacturer together with the equipment. The receipt for tax
purposes or the purchase invoice must be sent together with the goods.
3. The electronic parts are covered by a 24-month warranty. The warranty is given through the
point of sale or directly from the manufacturer.
4. The warranty covers exclusively product damage causing operational defects.
5. The warranty covers exclusively the repair or replacement free of charge, including labour, of
components found to be defective in terms of manufacture or material.
6. The warranty does not apply to damage caused by neglect or use not complying with the
instructions provided, damage caused by work carried out by unauthorised personnel or
damage caused by accidental causes or the buyer's negligence, with particular reference to
external parts.
7. The warranty does also not apply to damage to the equipment caused by incompatible power
supplies (the equipment operates at 4.8V with an internal battery pack).
8. Parts subject to wear after use are excluded from the warranty.
9. The warranty does not include transport costs to be paid by the purchaser in relation to the
method and speed of transport.
10. The warranty expires after 24 months. After such time repair work will be carried out at
the rates currently in force for the parts replaced and the labour and transport costs.
11. Any controversy will fall within the exclusive jurisdiction of the Venice courts.
MAG1000. All rights reserved. MAG1000 and the
I.A.C.E.R Srl and are registered.
IACER S.r.l. 38 di 56
logos are owned by
MNPG10 Rev. 06 Ed. 21/03/2010