Storage Precautions; Disposal; Troubleshooting - i-tec MAG1000 Mode D'emploi

Storage precautions

MAG1000 is protected till following environmental conditions:
Outside of the packaging
Temperature
Humidity
Pressure
Inside of the packaging
Temperature
Humidity
Pressure

Disposal

The equipment is subjected to WEEE regulations (see the symbol
separate waste collection: when disposing this product, please use the designed areas for disposing
electronic waste or contact the manufacturer.

Troubleshooting

If it is used in accordance with the instructions of the user manual, MAG1000 does not need a
particular regular maintenance.
If you find any malfunctioning using MAG1000, please follow these instructions:
•
Check battery status (see chapter "Battery charging");
•
Check the correct connection between MAG1000 and the therapeutic belt;
•
Check all the operations have been done properly;
•
Every two years we suggest a complete check of device (contact the manufacturer or locator
dealer).
WARNING: after prolonged inactivity, the unit may not switch on. This is because the battery is
completely drained and not due to malfunction. Recharge the battery as described above before
troubleshooting for faults.
IACER S.r.l. 36 di 56
from +5 to + 40 °C
form 30 to 80%
form 500 to 1060 hPa
from –10 to +55 °C
from 10 to 90%
from 500 to 1060 hPa
on the label) concerning
MNPG10 Rev. 06 Ed. 21/03/2010