JVC CU-VF100 Instructions page 13

■
Attaching the Viewfinder (page 2, figure B)
Turn off the camera.
A
Remove the shoe cover of the camera.
B
Align the viewfinder with the shoe of the camera and insert it
C
until it comes to a stop.
NOTE:
•
To detach, turn off the camera and follow the steps for attaching the
viewfinder in the reverse order.
■
Using the Viewfinder (page 3, figure C)
Turn on the camera.
A
Press the monitor switch button to switch the monitor display
B
to the viewfinder.
•
Each time the monitor switch button is pressed, the monitor
display switches between the LCD monitor and the viewfinder.
Turn the diopter adjustment dial and adjust such that the
C
display on the viewfinder can be seen clearly.
EN
13